 |
TECHNICKÝ LIST 16.07.2007 |
|
Optiva Formo |
|
|
| TYP | Interior decorative plaster. | |
| VHODNOSŤ | Optiva Formo can be applied on cement plasters and lime-cement plaster, dry plasters and concrete surfaces. | |
| PRÍKLADY POUŽITIA | Walls | |
| TECHNICKÉ ÚDAJE | ||
 2  2,5 |
||
| Vlastnosti | Consistency: BGS apparatus type: 10-11 cm | |
| Rozsah odtieňov | Available in white and colours from Tikkurila Interior Colours collection; colours are as close to the colour card as possible; final colour will depend on condition and method of application, tools and structure of the plaster. | |
| Stupne lesklosti | 6. Plný mat | |
| Výdatnosť | 2 – 2,5kg/ m2 (the package is enough to get approx. 5 -7 m2 of ready surface). | |
| Veľkosti balenia | 14 kg | |
| Riedidlo | Voda | |
| Pomer miešania | Water max 10% | |
| Aplikačná metóda | Stainless steel or plastic float. |
|
| Doba schnutia pri 23°C a 50% relatívnej vlhkosti vzduchu | Full dry after 48 hours (depending on temperature and humidity of the air), painting with stain after min. 24 hours, complete hardening after 28 days. |
|
| Skladovanie | Protect from frost. Store in tightly closed cans, in dry premises. Storing temperature should be below 5°C - 25°C.
|
|
| NÁVOD NA POUŽITIE | ||
| Podmienky aplikácie | Surface dry and clean. Temperature of air and surface should be +5 °C, relative humidity of the air max. 80%. In case of too thick surface or too fast drying because of high temperature the cracks can appear on the surface of the plaster. | |
| Príprava | Pre-treatment:
The surface must dry, clean, free from dirt, dust and grease. Fresh cement and lime-cement plasters should be seasoned before the application of plaster min. for 4 weeks. Remove thoroughly any surface of the glue and lime paints and old loose paint. Any uneven spots or cracks fill with Prestia manufactured by Tikkurila. Such prepared surface rinse with water. Absorptive surface should be primed with Optiva Grunt. |
|
| Aplikácia | Apply Optiva Formo with stainless steel or plastic float create a surface 1-2 mm thick. The structure is given during application of plaster creating grooves and wipes. The plaster can be thin with max. 10 % of water, if necessary. The final structure and efficiency depend on the type of used tool, thickness of used surface and the technique of application. To make all surface or architectonical part of it should be used a product from one production batch. In order to get an additional colour effect, after min. 24 hours you should apply Feelings Effect Paint and make special effect using the sponge. The surface of plaster which was painted with Feelings Effect Paint is touch dry after min. 3 hours from application in temp. +23 °C and relative humidity of the air 50%. It is also possible to apply plasters in different colours on the same surface to create an additional colour effect.
|
|
| Čistenie náradia | Tools should be cleaned with water immediately after use. | |
| ZDRAVOTNÁ A BEZPEČNOSTNÁ KLASIFIKÁCIA | Product not classified as a dangerous by Act from 11th of January 2001 about chemical substances and chemical agents (Dz.U. z 2001 r. Nr. 11 poz. 84) also with later changes. Material Safety Data Sheet available at Client request. Material Safety Data Sheet - Optiva FORMO | |
| OCHRANA ŽIVOTNÉHO PROSTREDIA A ZNEŠKODNENIE ODPADU | Empty cans and liquid waste should be recycled or disposed of in accordance with local regulations. | |
| DOPRAVA | - | |
| - | ||
Horeuvedené informácie, založené na laboratórnych testoch a praktických skúsenostiach, sú platné od dátumu uvedeného na technickom liste výrobkuKvalita produktov je zabezpečovaná našim operačným systémom, podľa požiadaviek ISO 9001 a ISO 14001.Výrobca nemôže byť zodpovedný za žiadne škody, ktoré vznikli použitím výrobku bez dodržania inštrukcií alebo za nevhodným účelom.
