 |
TECHNICKÝ LIST 13.12.2006 |
|
Lakkakitti (Lacquer Putty) |
|
|
| TYP | Alkyd filler | |
| VHODNOSŤ | for interior and dry exterior surfaces, smoothing and filling of wooden, wood fibre board, chipboard and metal surfaces. Suitable for repairing of scratches and filling and puttying of small areas and to be used with waterborne, alkyd, oil and catalyzed paints. The surface is easy to sand, dry or wet, or to scrape. | |
| PRÍKLADY POUŽITIA | Furniture, doors, cracks and joints on walls, doors, window frames etc. Machinery, boats, vehicles etc. | |
| TECHNICKÉ ÚDAJE | ||
|
||
| Rozsah odtieňov | White | |
| Veľkosti balenia | 1/3 l, 1 l, 3 l, 10 l. | |
| Riedidlo | White Spirit 1050 | |
| Aplikačná metóda | Spatula or spray | |
| Doba schnutia pri 23°C a 50% relatívnej vlhkosti vzduchu | 0.5 – 2 hours depending on the layer thickness, the temperature and the relative humidity of the air and also the material to be treated. | |
| Sušina | 74 %. | |
| Hustota | 1.8 kg/l, ISO 2811 | |
| Skladovanie | Protect from frost. | |
| Kód produktu | 007_2270 | |
| NÁVOD NA POUŽITIE | ||
| Podmienky aplikácie | The surface to be treated must be dry, the temperature of the air at least 5˚C and the relative humidity of the air below 80 %.
|
|
| Príprava | Unpainted surfaces:
Remove dirt, dust and loose material from unpainted surfaces. Better adhesion will be achieved by priming the porous surfaces with Jehu primer, thinned with 10 % White Spirit. Previously painted surfaces: Wash down previously painted surfaces with Maalipesu Cleaning Agent and rinse thoroughly with water. Remove loose paint with a scraper and sand down the surface. Remove sanding dust. |
|
| Tmelenie | Apply Lacquer Putty with a spatula direct on wooden, chipboard, wood fibre board of metal surfaces or on dry primer. It is usually enough to repair only the scratches and to fill small areas on wooden, wood fibre board, chipboard and metal surfaces. Lacquer Putty does not normally need to be thinned for spatula application, but for spray application it can be thinned with White Spirit 1050. Finish the surfaces with ordinary alkyd or waterborne paints, also solventborne priming, undercoating or finishing paints can be used for finishing. | |
| Čistenie náradia | Clean the tools with White Spirit 1050. | |
| ZDRAVOTNÁ A BEZPEČNOSTNÁ KLASIFIKÁCIA | Contains: Naphtha, hydrodesulfurized heavy FLAMMABLE. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Use only in well ventilated areas. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of the reach of children. Contains methylethylketoxime. May produce an allergic reaction. A Material Safety Data Sheet is available at request. Material Safety Data Sheet - Lakkakitti | |
| OCHRANA ŽIVOTNÉHO PROSTREDIA A ZNEŠKODNENIE ODPADU | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste. | |
| DOPRAVA | VAK/ADR 3 II | |
| mli051206/rku111206/ktu131206/007 2270 | ||
Horeuvedené informácie, založené na laboratórnych testoch a praktických skúsenostiach, sú platné od dátumu uvedeného na technickom liste výrobkuKvalita produktov je zabezpečovaná našim operačným systémom, podľa požiadaviek ISO 9001 a ISO 14001.Výrobca nemôže byť zodpovedný za žiadne škody, ktoré vznikli použitím výrobku bez dodržania inštrukcií alebo za nevhodným účelom.
